Full range of visible & infrared optical components

	High Energy Broadband Mirrors 350-1150nm High Energy Laser Line Mirrors
	Ultra-Broadband Mirrors 350-1100nm BBDS Serie TLM1 - Tunable Laser Line Mirrors 190-2100nm TLM2 - Tunable Broadband Mirrors 450-2100nm Nd:YAG 1064/532 nm Dual Wavelength Mirror HM Serie MAXBRIte� Flat Mirrors Broadband Coating BLD-Diode Lasers Mirrors 670-1550nm Diode Pumped Resonator Mirrors Excimer & HeNe Dielectric Laser Mirrors Fiber Laser Mirrors FLM Serie -780nm to 1900nm Ultrafast Nd:YAG 532nm Laser Mirrors Y Gas Laser Dielectric Mirrors Lasers Mirrors 1064-670nm & 1064nm-633nm HIgh Energy Partial Reflecting Laser Mirrors	Laser Diode Mirrors 670 -1550nm LDM Serie High Energy Reflector Mirrors- 0-45° ARF Serie Nd:YAG Scanning Mirrors-YS Serie High Power Nd:YAG Lasers Mirrors Joule Optik Laser Grade Mirror 248-1064nm Nd:YLF Lasers Mirrors JouleOptik� Output Couplers 248-1064nm Low Loss Nd:YAG Laser Mirrors -Y1S Serie Solid State Lasers Dielectric Mirrors Broadband Laser Diode Mirrors BLD Serie 0�45° Broadband Visible Mirrors 488�694nm

High Energy Broadband Mirrors 350-1150nm
These super broadband mirrors (SBB) are ideal for beam-steering applications using both the fundamental laser wavelength and one or more harmonics within the same beam path. Because it is an all-dielectric design, they can handle the high laser powers of both CW and pulsed systems, without limiting the useful angle of incidence or sensitivity to varying states of polarization. Broadband laser mirror for UV-NIR Ideal for high-power Nd:YAG and fiber laser systems All-dielectric IBS coating design Can be used at any incidence angle 0-50° Custom mirrors are available on other flat and curved substrates. Also, contact us for details on stress-compensated mirrors for λ/10 surface flatness after-coating.

High Energy Laser Line Mirrors
PPC offers superior quality laser optics using only ion-beam-sputtered (IBS) coatings because IBS coatings are significantly more dense, durable, and rugged than conventional e-beam or ion-assisted evaporated coatings. Compared to other coatings, IBS coatings also offer lower scatter and absorption losses and fewer pin-hole defects in the coated surface. This superior film quality and uniformity results in environmentally stable optics with laser damage thresholds exceeding 40 J/cm2 at 1064 nm. Main Features: R >99.9% at 0° or 45° for both s & p Damage Threshold: 40J/cm2 @ 1064nm -20ns, 20Hz 8J/cm2 @ 532nm -10ns, 20Hz 3J/cm2 @ 355nm-10ns, 20Hz 2J/cm2 @ 266nm-7ns, 20Hz Ideal for high-power Nd:YAG and fiber laser applications Custom reflectivities to >99.998% Material Fused Silica

Ultra-Broadband Mirrors 350-1100nm BBDS Serie
BBDS mirror seire - Greater 99% reflectivity for all wavelengths from 350 nm to 1100 nm for any polarization state, and for all angles of incidence from 0° to 50° simultaneously yet with high laser damage threshold. The BBDS is useful in any application that calls for steering a diverse range of wavelengths of arbitrary polarization, especially from multi-wavelength laser systems such as Nd:YAG lasers operating at 1064nm, 532 nm and 355 nm. Substrate material: BK7 glass Near UV, All visible, Near IR R>98.5% for angles up to 45° Confocal microscopy Multiphoton fluorescence Nd:YAG fundamental and harmonic wavelengths Damage Threshold: Pulsed 3 J/cm2, 20 nsec, 20 Hz @ 1064 nm 1 J/cm2, 10 nsec,20 Hz @ 355 nm Reflectivity: 0-45° R > 98.5% for unpolarized

TLM1 - Tunable Laser Line Mirrors 190-2100nm
For application at user-specified wavelengths, these single stack, high-damage-threshold mirrors have become the industry standard. Damage threshold is greater than 20 J/cm 2 depending on such factors as pulse width, repetition rate, and exact beam profile. Damage Threshold: cw 10 MW/cm2 @1064 nm Pulsed 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm Wavelength: from 190nm up to 2100nm

TLM2 - Tunable Broadband Mirrors 450-2100nm
The TLM2 mirrors are specially designed to achieve high reflectivity and low dispersion for cw oscillators and low-fluence pulses. These mirrors can be coated for any angle of incidence from 0° to 60° and any center wavelength between 450 nm and 2100 nm. For 45° tuning mirror applications involving very short pulses or very broad bandwidths, it's recommended using S polarization if possible. This minimizes pulse distortion and maximizes average reflectivity. Damage Threshold: Pulsed 100 mJ/cm2, 8 nsec @ 1064 nm Radius of curvature( Concave or Convex): 0.025m up to 20m

Nd:YAG 1064/532 nm Dual Wavelength Mirror HM Serie
Serie HM: durable dielectric wavelength mirrors are designed for high reflectivity at both Nd:YAG and doubled YAG wavelengths at either 0° or 45°. R > 99.0% at 1064 nm and 532 nm Incident angles other than 0° and 45° may be specified Diameter: 12.7 to 101.6mm Substrate material: BK7 glass Damage thresholds: 10J/cm², 8ns pulse; 1MW/cm², CW at 1064nm typical

MAXBRIte� Flat Mirrors Broadband Coating
MAXBRIte™ coating Flat Mirrors offer extremely high reflectance over a broad range of wavelength. Most of the UV, Visible and NIR wavelengths are covered by one of the MAXBRIte™ Coating range. MAXBRIte™ Coating Range: 245-390nm 420-700nm 480-700nm 630-850nm Round or Square shape Substrate material: BK7 Damage thresholds: 100mJ/cm², 8ns pulse at 1064nm typical

BLD-Diode Lasers Mirrors 670-1550nm
Serie BLD - 0° & 45°:Broadband mirrors for popular laser diode wavelength Substrate material: BK7 glass Damage thresholds: 20J/cm², 8ns pulse; 1MW/cm², CW at 1064nm typical Certification up to 40J/cm², please contact us

Diode Pumped Resonator Mirrors
Diode pumped cavity optics require high reflectance at 1047-1053 nm or 1064 nm and transmission approaching 100% at the pump wavelength. Substrate material: BK7 Pump reflectors Damage thresholds: 10J/cm², 8ns pulse; 1MW/cm², CW at 1064nm typical Certification up to 40J/cm² Other diode pumped wavelength can be specified R>99.5% at 1064nm or 1047nm and 1053nm

Excimer & HeNe Dielectric Laser Mirrors
High reflectance for excimer laser line and HeNe alignment laser. Serie ARF 193 nm-KRF 248 nm-XECL 308 nm-XEF 351-353 nm Diameter: 25 to 50.8mm Concave and convex mirrors All dielectric coatings for durability and high damage threshold

Fiber Laser Mirrors FLM Serie -780nm to 1900nm
This line of laser mirrors have been specifically developed for use with fiber lasers. 0° dielectric mirror designed for 1030nm or 1075nm fiber laser systems will also reflect > 99% at 1064nm. Laser marking Precision micromachining Optical tweezers Wavelengths: 780-1064--1030-1070-1080-1090-1100-1850-1550-1900nm Other center wavelengths and substrate dimensions are available upon request Damage Threshold: cw 10 MW/cm2 @ 1064 nm Pulsed 10 J/cm2, 20 nsec, 20 Hz @ 1064 nm

Ultrafast Nd:YAG 532nm Laser Mirrors Y
The Y Series of Nd:YAG laser line mirrors utilize durable, dielectric coatings to achieve both high damage threshold and high reflectivity. These mirrors are readily available in a variety of substrate sizes with curved or flat surfaces, and at either 0° or 45°. High reflectivity > 99.5% at 0° incidence Flat, convex and concave substrates Damage Threshold: cw 10 MW/cm2 @ 1064 nm Pulsed 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm

Gas Laser Dielectric Mirrors
Beamsteering of typical gas laser lines Substrate material: UV grade fused silica or BK7 Damage thresholds: 1MW/cm², CW at 515nm typical Wavelength range: Argon: 244-257-351-364-488-515nm HeCd:442-325nm HeNe:633nm Iodine:1315nm Nitrogen:337nm

Lasers Mirrors 1064-670nm & 1064nm-633nm
Serie YD & YH: Dual wavelength Lasers Mirrors 1064-670nm & 1064nm-633nm Angle of Incidence: 0° or 45° Minimum Unpolarized Reflectance at: 1064 nm 99.0% 633 nm 80.0% When ordering, specify pulse energy, beam diameter, and repetition rate. Substrate material: BK7 glass Simplify alignement with economical 670nm laser diode

HIgh Energy Partial Reflecting Laser Mirrors
PR1 Serie Dielectric High-Energy Partial Reflecting Laser Mirrors. Angle of Incidence: 0° Damage Threshold: Fused Silica - 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm BK7 - 10 J/cm2, 20 nsec, 20 Hz @ 1064 nm Center wavelength: from 193nm up to 2100nm

Laser Diode Mirrors 670 -1550nm LDM Serie
Serie LDM: Diode Lasers Mirrors 670 -1550nm Highly reflecting, all dielectric mirrors centered at popular diode wavelengths. Diameter: 12.7-50.8mm Material: BK7 glass Damage thresholds: 20J/cm², 8ns pulse; 1MW/cm², CW at 1064nm typical Certification up to 40J/cm², please contact us

High Energy Reflector Mirrors- 0-45° ARF Serie
Normal-incidence and 45° high-reflectance mirrors are excellent for laser cavity and beam-steering applications. Ultrahard high-damage-threshold coatings are available for all wavelengths from 248 to 1064 nm. A durable coating is available at 193 nm.

Nd:YAG Scanning Mirrors-YS Serie
Serie YS: Nd:YAG Scanning Mirrors Damage Threshold: cw: 1 MW/cm2 @ 1064 nm Pulsed: 10 J/cm2, 20 nsec, 20 Hz @ 1064 nm 99.0% reflectance for any polarization over 30°–50° scan angle Other dimensions and rectangular shapes available Other angles available Select 0.125-in.-thick fused silica substrates for higher scanning frequency

High Power Nd:YAG Lasers Mirrors
High Energy Nd:YAG Lasers Mirrors - Serie Y Damage Threshold: cw 10 MW/cm2 @ 1064 nm Pulsed 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm Wavelengths: 1064-532-355-266-213-1319nm High reflectivity > 99.5% at 0° incidence Flat, convex and concave substrates

Joule Optik Laser Grade Mirror 248-1064nm
Joule Optik Laser Grade Mirror inspection is a higher level of inspection criteria. This inspection criteria ensures the highest level of surface perfection. It is suggested to use "Laser Grade" when building laser cavities. Laser cavity mirrors External beamsteering Best option for high laser damage threshold Low scatter Damage Threshold: cw 1 MW/cm2 @ 1064 nm Pulsed 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm Wavelength: from 248nm up to 1064nm Flat, Concave and convex radius of curvature

Nd:YLF Lasers Mirrors
The YL series of Nd:YLF laser line mirrors utilize durable, dielectric coatings to achieve both high damage threshold and high reflectivity. These mirrors are readily available in a variety of substrate sizes with curved or flat surfaces, and at either 0° or 45°. Damage Threshold: cw: 1 MW/cm2 @ 1064 nm Pulsed: 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm High reflectivity > 99.5% at 0° Flat, convex and concave substrates

JouleOptik� Output Couplers 248-1064nm
Laser grade inspection is a higher level of inspection criteria which uses a higher intensity light. This inspection criteria ensures the highest level of surface perfection. It is suggested to use "Laser Grade" when building laser cavities. Laser cavity output couplers Best option for high Laser Damage Threshold Low scatter Damage Threshold: cw 1 MW/cm2 @ 1064 nm Pulsed 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm

Low Loss Nd:YAG Laser Mirrors -Y1S Serie
The Y1S low-loss Nd:YAG laser-line mirror utilizes a durable coating to achieve both very high damage threshold and high reflectivity. High reflectivity > 99.99% at 0° incidence Damage Threshold: 30 J/cm2, 20 nsec, 20 Hz incidence angle: 0& 45°

Solid State Lasers Dielectric Mirrors
ALX, ERG, R Series -Solid State Lasers Mirrors 0° & 45° Damage Threshold cw: 1 MW/cm2 @ 1064 nm Pulsed: 20 J/cm2, 20 nsec, 20 Hz @ 1064 nm Laser line: Alexandrite 720-780nm Er:glass: 1540nm Ruby: 347 or 694nm

Broadband Laser Diode Mirrors BLD Serie
BDL Serie - Broadband mirrors for popular diode laser wavelengths. Angle of Incidence: 0°–45° Material: BK7 glass Wavelength range: 670–905nm/1200–1310nm/1408–1550nm Substrate material: UV grade fused silica or BK7 Damage thresholds: 20J/cm², 8ns pulse; 1MW/cm², CW at 1064nm typical Certification up to 40J/cm², please contact us

0�45° Broadband Visible Mirrors 488�694nm
BBD1 Serie -General purpose visible laser mirror from 488nm to 694nm. Substrate material: BK7 glass General purpose visible mirrors R>99% for angles up to 45°